How to Save SHSH Blobs Using 3uTools
SHSH blobs are digital signatures that Apple uses to verify the iOS version on your device. If you want to downgrade or upgrade your iOS version, you need to have the SHSH blobs saved for that specific version. Otherwise, you will not be able to restore your device using iTunes.
3utools shsh
Download File: https://settranhasphar.blogspot.com/?d=2tFZg0
One of the easiest ways to save SHSH blobs is by using 3uTools, a free software that can manage your iOS device, backup and restore data, flash firmware, jailbreak and more. In this article, we will show you how to save SHSH blobs using 3uTools in a few simple steps.
Step 1: Download and Install 3uTools
You can download 3uTools from its official website: https://www.3u.com/. After downloading the setup file, run it and follow the instructions to install 3uTools on your computer.
Step 2: Connect Your Device and Launch 3uTools
Connect your iOS device to your computer using a USB cable. Make sure you trust the computer on your device. Then, launch 3uTools and wait for it to detect your device. You should see your device information on the main interface of 3uTools.
Step 3: Save SHSH Blobs
On the left panel of 3uTools, click on \"Flash & JB\". Then, click on \"Advanced\" and select \"Save SHSH\". You will see a list of available SHSH blobs for your device. You can choose to save all of them or select the ones you want. Then, click on \"Save\" and choose a location to save the SHSH blobs on your computer.
3uTools will start saving the SHSH blobs for your device. You can check the progress and status on the bottom of the interface. Once it is done, you will see a message saying \"Save SHSH successfully\". You can also view the saved SHSH blobs by clicking on \"View SHSH\" on the top right corner of the interface.
Conclusion
Saving SHSH blobs is important if you want to have more control over your iOS device and its firmware. With 3uTools, you can easily save SHSH blobs for any iOS version that is compatible with your device. You can also use 3uTools to flash custom firmware, jailbreak your device, backup and restore data and more. 3uTools is a powerful and versatile tool that every iOS user should have.
How to Restore Your Device Using SHSH Blobs and 3uTools
If you have saved SHSH blobs for your device using 3uTools, you can use them to restore your device to a specific iOS version. This can be useful if you want to downgrade or upgrade your iOS version, or if you want to fix some issues on your device. However, restoring your device using SHSH blobs will erase all your data and settings, so make sure you have a backup before proceeding.
Here are the steps to restore your device using SHSH blobs and 3uTools:
Step 1: Put Your Device in Recovery Mode or DFU Mode
To restore your device using SHSH blobs, you need to put your device in recovery mode or DFU mode. Recovery mode is a mode that allows you to restore your device using iTunes or 3uTools. DFU mode is a mode that bypasses the bootloader and allows you to flash custom firmware using 3uTools.
To put your device in recovery mode, follow these steps:
Turn off your device.
Press and hold the power button and the home button (or the volume down button for iPhone 7 and later) at the same time for about 10 seconds.
Release the power button but keep holding the home button (or the volume down button) until you see a message on your computer saying \"iTunes has detected an iPhone in recovery mode\".
To put your device in DFU mode, follow these steps:
Turn off your device.
Press and hold the power button and the home button (or the volume down button for iPhone 7 and later) at the same time for about 10 seconds.
Release both buttons and wait for about 5 seconds.
Press and hold the power button and the home button (or the volume down button) again for about 10 seconds.
Release the power button but keep holding the home button (or the volume down button) until you see a message on your computer saying \"iTunes has detected an iPhone in recovery mode\".
You can also use 3uTools to enter recovery mode or DFU mode. On the main interface of 3uTools, click on \"Flash & JB\" and then click on \"Easy Flash\". You will see a list of available firmware for your device. On the top right corner of the interface, you will see two buttons: \"Enter Recovery Mode\" and \"Enter DFU Mode\". Click on the one you want and follow the instructions on the screen.
Step 2: Select the Firmware and SHSH Blobs
Once your device is in recovery mode or DFU mode, launch 3uTools and click on \"Flash & JB\". Then, click on \"Pro Flash\". You will see a list of available firmware for your device. You can choose to download one from Apple's server or import one from your computer. You can also choose to retain user data or erase all data.
After selecting the firmware, click on \"Select SHSH\" on the bottom of the interface. You will see a list of saved SHSH blobs for your device. Select the one that matches the firmware version you want to restore to. Then, click on \"Flash\".
Step 3: Wait for the Process to Complete
3uTools will start flashing your device with the selected firmware and SHSH blobs. You can check the progress and status on the bottom of the interface. Do not disconnect your device or use your computer during this process. Once it is done, you will see a message saying \"Flash succeeded\". Your device will reboot and you can set it up as new or restore from a backup.
Conclusion
Restoring your device using SHSH blobs and 3uTools is a way to customize your iOS experience and fix some issues on your device. However, it is not without risks and limitations. You should always backup your data before restoring your device, and be aware that some features may not work properly after restoring. You should also check if Apple is still signing the firmware version you want to restore to, as this may affect the success rate of restoring. If you encounter any problems during or after restoring, you can contact 3uTools support team for help. 06063cd7f5